Comments
Memory Voltage Pencil Mods: Foxconn C51XEM2AA & Gigabyte 965P DQ6
Foxconn C51XEM2AA Memory Voltage Pencil Mod
Written by Shamino and filed under Guides > Overclocking
Published on July 9, 2006, 10:19 pm
Comments(0) 
Print 
Email 
Digg 
del.icio.us 
Reddit 
Slashdot 
Facebook DDR2 Memory chipsets have matured and overclockers are starting to see DDR2 Memory sticks respond and scale very well with increased voltages. What was more than enough in the past seems limiting now. With just a sharpened pencil, you can take matters into your own hands... Voltage Mod your AM2 Foxconn C51XEM2AA and Intel Conroe supporting Gigabyte 965P DQ6!
Read More >>
Comment by: FeloCaR on 21-Nov-2006 1:48 am
| hi sham, do you know whats the max voltage you can give to mem with this mod (using 20k vr)?? Or its just for making 2.5v get stable? |
Comment by: Shamino on 09-Sep-2006 12:38 am
| cant remember maybe yea just up it one notch andf if voltage read goes up to im sure u're fine |
Comment by: Eldonko on 07-Sep-2006 10:46 pm
| I tried with 2 different DMM, both gave same result. For ground I am using a screw that is holding the board down to an alumi tray. Did you find measured vdimm is lower than bios vdimm or am I grounding improperly or something? Thanks for the reply. |
Comment by: Shamino on 07-Sep-2006 7:38 pm
Quote:
is which ground point did u connect ur multimeter black tip to? is ur meter running low on battery  |
Comment by: Eldonko on 07-Sep-2006 1:51 pm
| Hey guys, sorry to bump an old thread but I have a question. When measuring vdimm using measure point as outlined below in pic, I am getting a big difference compared to bios. For example 2.3v BIOS = 2.08v DMM. http://resources.vr-zone.com.sg/Shamino/4bds/dq6m1.jpg I was about to add the trimpot but I need to figure out what the voltage is for sure. Stock vdimm = 1.8v correct? Thanks! |
Comment by: yantronic on 10-Jul-2006 8:40 pm
 Vdd is on FB3 of ISL6537 on DQ6 for 2+ V.  |
Comment by: Shamino on 09-Jul-2006 10:33 pm
Quote:
|